Single and Multiple Pumps

PGP315/330/350/365™ Series

PGP300 Series Pumps

• Three-piece cast iron construction
• Low friction bushing design
• Standard SAE mounting flanges
• Shafts :SAE splined, keyed and others
• Porting: SAE split flanges and straight thread
• Heavy-duty application
• Single, multiple, piggyback and thru-drive assemblies

The PGP/PGM300 Series pumps and motors set the standard for superior performance and reliability in heavy-duty hydraulic application. The three-piece cast iron construction with large area, low-friction bushings provide strength, high efficiency, and long life in severe operating environments. The design includes an advanced thrust plate and seal configuration, which optimizes performance even in high temperature and low viscosity conditions.

The PGP300 Series pumps are available in single, multiple, piggyback, and thru-drive assemblies. Multiple pumps reduce mounting costs, allow for a small package size and common inlet capabilities. Assemblies up to six pumping sections are available. Piggyback pumps allow the combination of pump sections of different frame size to use a common inlet in tandem configuration. The thru-drive feature  allows an independent piston or gear pump to be mounted to a rear SAE drive pad. Multiple section motors are also available providing enhanced torque and speed control as well as smooth torque ripple.

PGP315

• Displacements: 10 to 40 cc/rev
• Pressures to 3500 psi
• Recommended speed range: 600 to 3000 rpm

PGP330

• Displacements: 16 to 65 cc/rev
• Pressures to 3500 psi
• Recommended speed range: 600 to 3000 rpm

PGP350

• Displacements: 21 to 105 cc/rev
• Pressures to 3500 psi
• Recommended speed range: 600 to 2400 rpm

PGP365

• Displacements: 44 to 148 cc/rev
• Pressures to 3500 psi
• Recommended speed range: 600 to 2400 rpm

Email: sales@hsac.co.nz